DN400 PN16 Cast Iron Metal Seated Rising Stem Gate Valve
Description
TECHNICAL DATASHEET
DN400 PN16 Rising Stem Metal-Seated Gate Valve (German Standard)
Project / P.O. No.: ____________________
Tag No.: ____________________
Qty: ______ Units
1. General Specifications
| Item | Specification |
|---|---|
| Valve Type | Rising Stem Gate Valve (OS&Y), Metal-Seated |
| Nominal Size | DN400 (16″) |
| Pressure Rating | PN16 |
| End Connection | Flanged Ends |
| Flange Standard | DIN EN 1092-2 (PN16, Ductile Iron, Flat Face / Raised Face) |
| Face-to-Face Dimension | DIN EN 558 Series 1 (or DIN 3202 F4) |
| Design & Manufacture Standard | DIN EN 1171 |
| Test & Inspection Standard | DIN EN 12266-1 |
2. Design Parameters
| Item | Unit/Standard | Parameter |
|---|---|---|
| Max. Allowable Pressure | bar | 16 bar (at ambient temperature) |
| Service Media | – | Water, non-corrosive liquids, gases |
| Operating Temperature | °C | -10°C to 120°C (depending on trim materials) |
| Operation | – | Handwheel / Gearbox (Recommended) |
3. Material of Construction (M.O.C.)
| Part Name | Material Required | Standard / Grade (Ref.) |
|---|---|---|
| 1. Body | Ductile Iron (DI) | DIN EN 1563 (EN-GJS-400-15 or EN-GJS-450-10) |
| 2. Bonnet | Ductile Iron (DI) | DIN EN 1563 |
| 3. Wedge (Gate) | Ductile Iron (DI) with Bronze seat face | DIN EN 1563, seat overlay/inlay Bronze |
| 4. Seat Face | Bronze | Overlay or inlay, e.g., DIN EN 1982 (CuSn5Zn5Pb5) |
| 5. Stem | Stainless Steel | 13% Cr (1.4021) or 18-8 (1.4301 / 1.4303) |
| 6. Stem Nut | Bronze / Aluminum Bronze | High-strength wear-resistant alloy |
| 7. Packing | Flexible Graphite / PTFE | – |
| 8. Gasket | Non-asbestos fiber / Graphite | – |
| 9. Bolts/Nuts | Carbon Steel | Zinc plated or black finished |
| 10. Handwheel | Ductile Iron / Malleable Iron | – |
4. Main Dimensions (Reference)
Note: Dimensions for reference only. Final dimensions to be verified per manufacturer’s drawing. (Unit: mm)
| Description | Dimension | Remarks |
|---|---|---|
| Face-to-Face (L) | 600 mm | Per DIN EN 558 Series 1 (DN400 PN16) |
| Flange Diameter (D) | 580 mm | DIN EN 1092-2 PN16 |
| Bolt Circle Diameter (C) | 525 mm | DIN EN 1092-2 PN16 |
| Bolt Holes (n-ød) | 16-ø30 mm | 16 holes |
| Flange Facing Height (f) | 2 mm | Raised face height |
| Handwheel Diameter (W) | Approx. 560 mm | Varies by manufacturer; gearbox recommended for this size |
| Top-to-Open Height (H) | Approx. 1250 mm | From stem top to handwheel (Ref.) |
5. Inspection & Testing (DIN EN 12266-1)
| Test Description | Medium | Pressure (bar) | Requirement |
|---|---|---|---|
| Shell (Hydrostatic) | Water | 24 bar (1.5 x PN) | No visible leakage |
| Seat (High Pressure) | Water | 17.6 bar (1.1 x PN) | Leakage rate ≤ specified rating |
| Low Pressure Pneumatic | Air | 0.6 bar | Optional, leakage rate ≤ specified rating |
6. Options & Notes
-
Stem Upgrade: Stainless Steel 1.4408 (AISI 316)
-
Wedge Material: Full Stainless Steel (1.4408) or Nylon Coated Ductile Iron
-
Operation: Gearbox (standard recommendation) / Electric Actuator / Extension Stem
-
Flange Facing: Flat Face (FF) or Raised Face (RF) to match counter flange
-
Coating: Epoxy Coated (Blue RAL 5005 or Black), min. thickness 250μm
Remarks:
-
Seat Finish: Bronze seat faces are achieved by overlaying (welding) or inserting bronze rings on body and wedge, ensuring corrosion and wear resistance.
-
Stem Design: Rising stem design isolates stem from media, allowing easy in-line maintenance and visual indication of valve position.
-
Applicable Standards: This datasheet is based on current German Standards (DIN EN). Please confirm specific standard revisions and project requirements before procurement.
Prepared by: __________________
Date: __________________
