U Section Double Flange Butterfly Valve — DN1200, PN16, Nylon Coated Disc

U Section Double Flange Butterfly Valve DN1200 PN16, Ductile Iron body, Nylon coated disc, EPDM seat, worm gear handwheel operator, wear-resistant butterfly valve for water and sewage pipeline isolation, designed to EN 593.

Description

TECHNICAL DATA SHEET U Section Double Flange Butterfly Valve — DN1200, PN16, Nylon Coated Disc Doc No.: TDS-BFV-DN1200-PN16-02 Rev.: B Date: 2026-11-11

  1. General Description

This U section double flange butterfly valve is specially designed with Nylon Coated Disc for isolation and moderate throttling service in waterworks, drainage, HVAC and general industrial piping systems. It adopts ductile iron body, high-performance nylon coated butterfly disc, EPDM resilient seat, worm gear operator with handwheel for manual quarter-turn operation. The double flange connection enables simple, reliable installation between pipe flanges. The nylon coating on disc provides excellent wear resistance, low friction and anti-corrosion performance, reducing friction against EPDM seat and extending service life.

  1. Design & Construction Standards
  • Design: EN 593
  • Face-to-face: EN 558
  • Flange standard: EN 1092-2; ASME B16.5 on request
  • Pressure rating: PN16 (16 bar)
  • Inspection & test: EN 12266-1 / ISO 5208
  • Seat tightness: ISO 5208 Rate A, bubble-tight
  1. Pressure & Temperature Rating
  • Nominal pressure: PN16 @ 20℃
  • Shell hydrostatic test pressure: 24 bar
  • Seat tightness test pressure: 17.6 bar
  • Working temperature range: −10℃ ~ +80℃ (limited by EPDM seat and nylon coating)
  • Applicable media: clean water, sewage, neutral aqueous fluid, non-corrosive liquid

Note: For high temperature or special chemical media, seat and disc coating material shall be reconfirmed.

  1. Bill of Materials

Item Part Name Material Remarks 1 Body Ductile Iron (DI) GJS500-7, blue epoxy coated 2 Disc Ductile Iron, Nylon Coated Nylon coating, wear-resistant, low friction, anti-corrosion 3 Seat EPDM Rubber liner, resilient seat 4 Stem Stainless Steel 1.4021 / 2Cr13 5 Stem Seal EPDM Anti-leakage 6 Worm Gear Operator Cast Iron Black epoxy coating, handwheel operated 7 End Cover Ductile Iron Blue epoxy coated, 6 bolts fixed

  1. Dimension & Connection
  • Nominal Size: DN1200
  • Pressure Class: PN16
  • Connection Type: Double Flange
  • Structure: U-section body
  • Operation: Manual worm gear, 90° quarter turn
  • End cover: Hexagonal bolted end cover on non-drive side
  • Key feature: Nylon coated disc
  1. Operation
  • Manual worm gear drive, handwheel operated; clockwise for close, counter-clockwise for open.
  • Suitable for on-off service; can be used for throttling within limited range.
  • Locking device available for position holding on request.
  1. Marking
  • Body marking: DN1200, PN16, DI, manufacturer logo
  • Operator: Open / Close direction arrow
  • Casting marks conform to EN 593
  1. Application
  • Water treatment plant, raw water & purified water pipeline
  • Municipal sewage, drainage system
  • Cooling water, chilled water HVAC system
  • Irrigation, power plant auxiliary water system
  • Working conditions requiring wear-resistant disc
  1. Installation Notes
  2. Install between two matching flanges; ensure concentric alignment.
  3. Support the valve independently; do not use pipe to bear valve weight.
  4. Keep operator accessible for operation.
  5. Do not use excessive force on handwheel.
  6. Protect from freezing in cold environment.
  7. Disclaimer

This TDS is for quotation and technical reference only. End user shall verify suitability for working media, pressure and temperature. The warranty is valid only when the valve is installed, operated and maintained within the specified working limits. Water hammer, overpressure or improper media will void the warranty.

Prepared by: _______________ Approved by: _______________