Rubber Expansion Joint (Single Sphere)
SAVVY single sphere EPDM rubber expansion joint, carbon steel galvanized flange, PN10 PN16, for vibration isolation, noise reduction and piping displacement compensation in water, HVAC and chemical pipelines.
Description
# TDS – Technical Data Sheet
## Rubber Expansion Joint (Single Sphere)
Brand: SAVVY
Type: Single Sphere Rubber Flexible Joint / Rubber Expansion Joint
### Description
Single sphere rubber expansion joint is designed to absorb axial, lateral and angular displacement in piping systems, isolate vibration and reduce noise, compensate for installation misalignment, and protect pumps, valves and other pipeline equipment.
The rubber body is EPDM, matched with carbon steel galvanized flanges. It features excellent weather resistance, aging resistance and medium adaptability, widely used in water supply, drainage, HVAC, chemical and industrial piping.
### Construction
Rubber Body: Single sphere
Rubber Material: EPDM
Flange Material: Carbon Steel, Hot-dip Galvanized
Reinforcement: Polyester cord fabric reinforcement layer
Surface Marking: Laser marking for brand SAVVY and material grade
### Working Performance
Working Temperature: -30℃ ~ +120℃
Design Pressure: PN10 / PN16 (optional)
Vacuum Resistance: Compliant with ISO 1307
Allowable Displacement (Reference):
Axial Compression
Axial Extension
Lateral Offset
Angular Deflection
Applicable Medium: Fresh water, sewage, weak acid & weak alkali fluid, air, etc.
### Design & Standards
Flange Standard: GB/T 9113 / ANSI B16.5 / DIN EN 1092-1 (optional)
Test Standard: GB/T 14626
Quality Control: Hydrostatic test one by one before delivery
### Features
– Vibration absorption & noise reduction
– Compensate thermal expansion, contraction and installation deviation
– EPDM rubber, good ozone & ageing resistance
– Galvanized carbon steel flange, anti-rust
– Easy installation, no maintenance
– Shock absorption for pump inlet & outlet
### Installation Notes
1. Do not exceed the allowable displacement range.
2. Do not use the rubber joint to correct excessive piping misalignment.
3. Avoid sharp objects scratching the rubber surface.
4. Install expansion joints together with pipe supports/limit rods if required.
5. Do not weld flanges directly beside the rubber sphere to avoid high-temperature damage.
### Order Information
Item No. | DN | Pressure | Flange Standard | Rubber Material
SEJ-001 | DN50~DN300 | PN10/PN16 | Customizable | EPDM
Remark: Custom size, NBR, CR, FKM rubber material, stainless steel flanges are available upon request.

